Welcome to the UK
Walking Forum
Home
Help
Login
Register
Walking Forum
»
Main Boards
»
Welcome
»
Satmap screen
Print
Pages: [
1
]
Author
Topic: Satmap screen (Read 1455 times)
French Nomad
New Member
Posts: 2
Satmap screen
«
on:
19:38:10, 24/09/18 »
A broad straight blue line has appeared on my map screen. What is it and how do I remove it?
Logged
sussamb
Veteran Member
Posts: 8011
Re: Satmap screen
«
Reply #1 on:
19:42:48, 24/09/18 »
A solid blue line will connect your location to the GoTo point at all times, until the Clear GoTo button is pressed according to the SatMap manual. If you have the manual it may be worth reading it
Logged
Where there's a will ...
French Nomad
New Member
Posts: 2
Re: Satmap screen
«
Reply #2 on:
19:54:42, 24/09/18 »
Many thanks sussamb. I did read the manual cover to cover, or start to finish, many years ago, but have forgotten most of it as features that I use regularly are well know to me, but the blue line was a mystery 👍
Logged
alan de enfield
Veteran Member
Posts: 940
Re: Satmap screen
«
Reply #3 on:
17:26:08, 26/09/18 »
You can also get a blue-line (normally top-to-bottom) when you get pixel damage on the screen (something has pressed on it)
If it moves when you are walking, then its your 'goto pointer', if it is always in the same position then its 'pixel damage'
Section 8 of the manual :
An activate route has relevant data choices
available for display on the GPS MAP screen
in either 2 or 4 data box overlays (sections
7.04 – 7.08). Refer to MAIN MENU →
Settings → Set Trip Data to control whether
changing an activated route during a trip will
reset the log data.
When active, the route is shown as a yellow
or blue highlighted line with red arrowheads
indicating the direction of travel. Inactive
routes are shown as gray highlighted lines
when displayed.
«
Last Edit: 17:32:46, 26/09/18 by alan de enfield
»
Logged
Print
Pages: [
1
]
Walking Forum
»
Main Boards
»
Welcome
»
Satmap screen
Please join us (its free).
Terms of Use
Privacy Policy